What are DTF iron on transfers?

DTF or 'Direct to foil' transfers are professionally printed transfers, printed on a solid foil based medium with a strong, stretchy heat activated adhesive on the back. They are soft to the touch and, when cared for and applied correctly, won't peel, fade or crack!

Application instructions:

1. Pre iron garment
2.Preheat heat press or iron to 150c (high heat setting for irons) and make sure that any steam functions are turned OFF!
3.Position the transfer on your garment image side up.
4. Press with iron/ heat press using firm pressure for 10-12 seconds.
5. Once the transfer is cool, peel the film off.
6. If the transfer is not fully adhered please recover with the film and press again in 2 second blasts until it is fully adhered.
​
TIP: For a more matte finish - remove the film then cover with a teflon or other non stick sheet and press again for 2-3 seconds.
​